PLA Plus + 1.75mm 3D Printer Filament Consistent Diameter 0.03 Mm 1.75mm
What is PLA Plus?
PLA Plus is an enhanced version of our PLA that's less brittle and more durable.
PLA Plus is for applications where good vibration absorption and a lower fracture rate is needed.
*NOTE: Some printers do prefer lower temperatures for rigid.ink PLA Plus+ 200-210°C, bed temp 40°C.
If your test print is looking a little too runny and the layers aren't cooling enough try lowering your temperatures.
Product
PLA (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn't require a heated bed. It has the following characteristics:
Good toughness high strength, high stiffness ;
No block nozzle, good stick hot bed, a smooth PLA used
Can be processed at 185 degrees
Low shrinkage, thermoforming dimensional stability
| Material | PLA 3d printing material |
| Diameter | 1.75/2.85mm |
| Diameter Tolerance | ±0.02/±0.03mm |
| Net weight | 1kg |
| Surface | Glossy |
| Printing Temperature | 190℃~210℃ |
| Bed Temperature | 0~80℃ |
| Layer Thickness | 0.1~0.3mm |
| Print Speed | 20~50mm/s |
| Color | Silk Green,Glow Green,Pastel Green,Light Green,Transp Green,Green,Dark Green |
Package
Four steps to keep the package safe:Desiccant —› PE bag—›Vaccum packed—›Inner box;
black spool size : in poly bag(Vacuum packing) with a desiccant bag inside
Filament with spool
Inner box size: 20.8 X 20.8X 7.3cm
I : 4 box/carton carton size : 43.5 X 43.5 X 8cm
II : 8 box/carton carton size : 43.5 X 43.5 X 16.5cm
III : 12 box/carton carton size : 43.5 X 43.5 X 24.5cm
Filament without spool
Inner box size: 18.5*18.5*7cm
12 box/carton carton size : 39*39*23.5cm
| Shipping Way | Time control | Remark | country |
| By express (FedEx,DHL,UPS,TNT etc.) | 3-7 days | Fast,suit for trial order | all over the world |
| By Air | 7-10 days | Fast(small or mass order) |
| By Sea | 15~30 days | For mass order,economic |
Noted
| Pure Formula | Many PLA filaments may have inconsistencies or contaminants. This is a problem, because it can mean some parts or sections of your filament can have varying extruding temperatures, leading to blockages. |
| Consistent Diameter (0.03 mm +/- ) | What's often overlooked is the importance of maintaining a consistent diameter of the filament. If it's too wide in places, this again can stop your extruder from extruding. Thin sections can cause under extrusion. |
| Excellent Layer Adhesion | Our PLA filament produces a full strength print with excellent layer adhesion, meaning layer separation is a thing of the past. |
| NO stringing or blobbing | Due to our pure formulations (we have a strict no contaminants rule) your prints will come out with no stringing, or blobbing and excellent detail. |
Colour
| The colour you see in the photo is the exact colour you'll receive. Not only that, it won't look washed out after the heat from the extruding process either. Leaving you with rich, vibrant prints. |
Product Tags:
|
|
PLA Plus + 1.75mm 3D Printer Filament Consistent Diameter 0.03 Mm 1.75mm Images
|
